Discovered this series of short movies while checking out Fallout 3 Vids on Youtube.
The DC Chronicles.
The Fallout 3 engine allows for scripted sequences and I found a series of video's on Youtube by member Drakortha and OMG! this guy is good.
Not only is the scripting very well done, but the writing and how it is presented is incredible.
There are 3 episodes up at the time of this post. It is highly recommended that you watch them, even if you are not a fan of the game.
My hats off to you Drakortha. Damn good job.
Thursday, July 30, 2009
Thursday, July 23, 2009
Blame Fallout 3
It has been quite a while since I posted last.
I blame Fallout 3 for my absence. I have been sucked in, hook, line, sinker and life time subscription to Anglers Monthly.
I am still plugging away at the ORK-43 rules as well. Just not as quickly thanks to Fallout 3. (By the way I DO RECOMMEND that you get this game and play it).
I wish it had a co-op mode, but it does not and that is very sad. Having a few "buds" with you as you explore the Capital Wasteland would have been awesome.
Oh well. I have have land to explore and Karma to gain or lose!
I blame Fallout 3 for my absence. I have been sucked in, hook, line, sinker and life time subscription to Anglers Monthly.
I am still plugging away at the ORK-43 rules as well. Just not as quickly thanks to Fallout 3. (By the way I DO RECOMMEND that you get this game and play it).
I wish it had a co-op mode, but it does not and that is very sad. Having a few "buds" with you as you explore the Capital Wasteland would have been awesome.
Oh well. I have have land to explore and Karma to gain or lose!
Friday, May 8, 2009
Computers Suck
We had a power outage a week or so ago and my PC started acting up. So it became so bad that I really, really needed to get a new box.
So I got an iMac. I've been a PC "dude" since 1982 when the original IBM PC came out. Now I'm a UNIX Guru, having Linux or FreeBSD boxes in and out around the house, but supporting and having to constantly rebuild or compile my own drivers, etc... sucks. So I wanted a Unix variant that was supported by manufacturers and a company that would actually fix bugs that are reported and I don't have to compile anything.... unless I write it myself.
So now things are being ported over and hopefully I will be done soon.
Oh, why an iMac and not a MacBook Pro? Twenty Four Inches of Real Estate... now I have 48" of screen.... OMG!!! So the iMac has a 24" built in monitor and I have a 24" Dell monitor from my Windows Box. WHOOOT!!!!
Once I get stuff converted over and transferred, etc, etc. I'll be posting more!
TTFN!
So I got an iMac. I've been a PC "dude" since 1982 when the original IBM PC came out. Now I'm a UNIX Guru, having Linux or FreeBSD boxes in and out around the house, but supporting and having to constantly rebuild or compile my own drivers, etc... sucks. So I wanted a Unix variant that was supported by manufacturers and a company that would actually fix bugs that are reported and I don't have to compile anything.... unless I write it myself.
So now things are being ported over and hopefully I will be done soon.
Oh, why an iMac and not a MacBook Pro? Twenty Four Inches of Real Estate... now I have 48" of screen.... OMG!!! So the iMac has a 24" built in monitor and I have a 24" Dell monitor from my Windows Box. WHOOOT!!!!
Once I get stuff converted over and transferred, etc, etc. I'll be posting more!
TTFN!
Thursday, April 16, 2009
Ork Boys for Ork-43
I've been able to work on more of the conversion for Orks for AT-43. I'm planning on putting this all into a handy dandy downloadable PDF when it's done. So please be patient. And please post feedback!
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Monday, March 16, 2009
Necron Display Board (WIP)
I thought I'd document my Necron display board. I'll be using the same method to create boards for other armies. Not just for Warhammer 40k, but for AT-43, etc.

I have a set of Hole Saws, but I purchased them at Harbor Freight and I'm not thrilled with the sizes or that the 1" (25mm) one cracked on first use. So I purchased some Forstner bits and those are wonderful. The MDF board is a little hard, but with some patients it works well.
I should be able to use these bits to drill down into thicker wood to just the right depth. So making really nice wood boards should definitely be possible.




I put marks and made lines every 5cm since all the miniature bases I use are in millimeter and not inches. So the board gets covered with 5mm squares, I then place a base on the board and mark the corners of where a square would fit around it, then I draw lines between them, making an X. The X is where the drill bit goes for a nice cut. I have been spacing the small bases (25-40mm) 10mm apart just for strength. Since I'll be gluing this to metal, it probably won't matter, but I want to be sure.
As you can see, besides the Ork-43 conversion I'm doing, I also have other projects that I'm trying to get done.
So much to do, so little time.

I have a set of Hole Saws, but I purchased them at Harbor Freight and I'm not thrilled with the sizes or that the 1" (25mm) one cracked on first use. So I purchased some Forstner bits and those are wonderful. The MDF board is a little hard, but with some patients it works well.
I should be able to use these bits to drill down into thicker wood to just the right depth. So making really nice wood boards should definitely be possible.




I put marks and made lines every 5cm since all the miniature bases I use are in millimeter and not inches. So the board gets covered with 5mm squares, I then place a base on the board and mark the corners of where a square would fit around it, then I draw lines between them, making an X. The X is where the drill bit goes for a nice cut. I have been spacing the small bases (25-40mm) 10mm apart just for strength. Since I'll be gluing this to metal, it probably won't matter, but I want to be sure.
As you can see, besides the Ork-43 conversion I'm doing, I also have other projects that I'm trying to get done.
So much to do, so little time.
Tuesday, February 24, 2009
Ork-43 Infantry (Type 2) Tank Bustas
Here's the 2nd unit I've come up with. The Tank Busta's.
Tank Busta's (size 2)
Type: 2
Number(s) 10 to 15
Standard Equipment: Rokkitt Launcha and Choppa
Optional Equipment: Grenades
Special Weapons: Tank Hammer or Bomb Squiq
Specialists: Painboy; Kombat Engineer
Tank Busta's Glory Hogs MV: 18, Mrl: 8, Armor 5, Combat 8
(1) 10 Tank bustas, including 2 special weapon and 0 to 2 specialists + 0 to 1 officer
(2) 15 Tank bustas, including 4 special weapon and 0 to 2 specialists + 0 to 1 officer
Tank Busta's (size 2)
Type: 2
Number(s) 10 to 15
Standard Equipment: Rokkitt Launcha and Choppa
Optional Equipment: Grenades
Special Weapons: Tank Hammer or Bomb Squiq
Specialists: Painboy; Kombat Engineer
Tank Busta's Glory Hogs MV: 18, Mrl: 8, Armor 5, Combat 8
| Ranged Weapons | Range | ROF | AOE | PEN |
| Rokkitt Launcha | 0 | 2/0 | - | 12/2 |
| Special Weapons: | ||||
| Tank Hammer | 6 | 1/0 | - | 18/2 |
| Bomb Squiq (Indirect fire) | 40 | 1/0 | - | 17/3 |
| Equipment | Standard Number (1) | Maximum Number(2) | Extra Fighter |
| Standard | 160 AP | 300 AP | +15 AP |
| Grenades | 200 AP | 350 AP | +20 AP |
(1) 10 Tank bustas, including 2 special weapon and 0 to 2 specialists + 0 to 1 officer
(2) 15 Tank bustas, including 4 special weapon and 0 to 2 specialists + 0 to 1 officer
Labels:
40k,
AT-43,
hobby,
Miniatures,
Orks,
Warhammer 40
Friday, February 20, 2009
Ork-43 Infantry (Type 1) Gretchin
I've created my first Type * (1) infantry unit for Ork-43 (what I'm calling my conversion of Warhammer 40k Orks to AT-43). Please be reminded that no playtesting has been done yet so when all is said and done, this might not be balanced.... YET! Once I have all the units and costs done my group will be play testing and modifications will be made. Once the whole document is finished, I will be posting the "Army Book" and people will be able to download it for free. I will also try to come up with Cards for these units. If anyone knows a good artist that would like to volunteer for that job, I'd be glad to have the help. Otherwise people will be stuck with my crappy photoshop skills.
But without Further ado....
Gretchin (Size 1)
Type: 1
Number(s): 10 to 30
Standard Equipment: Blasta and Stabba
Optional Equipment: Grenades
Special Weapons: None
Specialists: Mekanik
Officers: Rank 1
Gretchin (size 1) MV: 12, Mrl: 6, Armor: 3, Combat: 3
Range ROF AOE PEN
Standard Ranged Weapons:
Grot Blasta 0 4/0 - 3/1
Mêlée weapon
Grot Stabba 5 1/0 - 5/1
Optional Weapons:
GRENADES (indirect fire) 0 1/0 1 4/1
Equipment Standard Number(1) Maximum Number(2) Extra Fighter
Standard 30 AP 90 AP +3 AP
Grenades 80 AP 240 AP +8 AP
(1) 10 Gretchin, including 0 to 2 specialists + 0 to 1 officer
(2) 30 Gretchin, including 0 to 6 specialists + 0 to 1 officer
Mekanik: The mekanik has the "Repair" ability. At the beginning or at the end of his unit's activation he can repair a friendly armored fighting vehicle within 2.5cm of him. The armored fighting vehicle recovers 1 SP in a location chosen by the player. Destroyed parts may be repaired.
A Gretchin officer cannot be the Company Commander of any Ork company unless Gretchen are the only Ork unit on the field even if there are Ork units that do not contain an officer that are not Gretchin.
But without Further ado....
Gretchin (Size 1)
Type: 1
Number(s): 10 to 30
Standard Equipment: Blasta and Stabba
Optional Equipment: Grenades
Special Weapons: None
Specialists: Mekanik
Officers: Rank 1
Gretchin (size 1) MV: 12, Mrl: 6, Armor: 3, Combat: 3
Range ROF AOE PEN
Standard Ranged Weapons:
Grot Blasta 0 4/0 - 3/1
Mêlée weapon
Grot Stabba 5 1/0 - 5/1
Optional Weapons:
GRENADES (indirect fire) 0 1/0 1 4/1
Equipment Standard Number(1) Maximum Number(2) Extra Fighter
Standard 30 AP 90 AP +3 AP
Grenades 80 AP 240 AP +8 AP
(1) 10 Gretchin, including 0 to 2 specialists + 0 to 1 officer
(2) 30 Gretchin, including 0 to 6 specialists + 0 to 1 officer
Mekanik: The mekanik has the "Repair" ability. At the beginning or at the end of his unit's activation he can repair a friendly armored fighting vehicle within 2.5cm of him. The armored fighting vehicle recovers 1 SP in a location chosen by the player. Destroyed parts may be repaired.
A Gretchin officer cannot be the Company Commander of any Ork company unless Gretchen are the only Ork unit on the field even if there are Ork units that do not contain an officer that are not Gretchin.
Subscribe to:
Posts (Atom)